My Favorite Fabric...KNITS! April 18 2014, 0 Comments
Lou from "Wotsybaby" eliminated the zipper and downsized to accommodate for the stretch in her knit for this cute Sunki.
She kept the overlap at the shoulder but eliminated the gathers on the sleeve. Her daughter was thrilled to have such a stylish dress but with added coziness.
When you've decided to go for it and use a knit for your next pattern measure the flat pattern first. Depending on the seam allowance you may find that simply sewing one size smaller will be the only adjustment you'll need to make. An example would be your daughter has a chest measurement of 24" and on the back of the sewing pattern she is a size 6/7 but you measure the pattern and notice after subtracting a 5/8" seam allowance on all seams the pattern is 26" you may want that one size smaller because the knit will be looser fitting than a woven and she could look a little lost in the end result. Another option is just eliminate the ease from the pattern and then adjust from there. It's always better to be too big than too small!!
On most woven patterns necklines will either have a facing or a full lining. You may get to avoid both of these by simply turning the neckline and topstitching because most knits don't fray and will still look professional by just turning and stitching. A double needle works great for this type of finish. Also, consider a binding or rib trim like the Sunki made by Lou; she skipped adding the facings and instead chose to use 2 rib knit trims instead. By doing this she gave the dress a real sporty feel.
Another amazing thing about knits is you may not even need to hem the garment! This is all personal preference. For me it depends on the garment, I love a nice raw edge look on the Seraphic Maxi Skirt to give it a little bohemian touch, but I don't think it would look very nice on the bottom hem on the Sunki.
Let's make something!!
I've decided to use the Ethereal Pattern to change up a what could be a very formal dressy blouse to a fun every day school shirt. My niece is on the small size of 4/5 so I've traced and cut out the size 2/3 because the Ethereal is nice and roomy and I don't want her to get lost in the fabric. I also did not cut out facings or a lining and will explain why below.
I always check or change my sewing needle first before each project to be sure and have the correct needle size and type in place. When sewing knits you'll want to use either a Ball Point Needle or Stretch Needle. Which one is the best one you ask? A Ballpoint needle is generally used for heavier, looser sweater knits and stretch needle for highly elastic fabrics, like Spandex, or Lycra. They both have rounded points that penetrate between fabric threads rather than pierce them. (Stretch-needle point is slightly less rounded than ballpoint.) Just make sure to test-stitch knits with ballpoint and stretch needles to see which yields the best results. If ballpoint skips stitches, try stretch needle instead! Here is the perfect master needle image to give you an idea about how different needles really are.
The Ethereal pattern uses a facing when sewing the garment with sleeves or for the sleeveless version it's fully lined, but because I'm using knit I've decided to just add a band to the neckline and the sleeve openings instead. I used my serger and rolled hemmed the edge of the flounce. If you don't own a serger you can leave the flounce raw edged or turn the raw edge 1/4" and topstitching. When sewing with knits you'll need to change the stitch on your sewing machine to a zig zag setting and adjust the length to 3.0 and the width to 1.0.
I've sewn the flounce in place and attached the back bodice at the shoulders only.
I've tried the top on my niece to make sure the opening is wide enough to go over her head. If it's too tight, I suggest trimming the neck edge by 1/8 - 1/4" then try it on again. To make the neck band simply measure the neck opening and subtract .5". My neck edge measured 19.5". Be careful not to stretch the neck opening while measuring. I want a thin neck band so I've cut a 19" x 1.5" band. Sew the neck band with a 1/2" seam allowance. My band is now 18" x 1.5". Right sides together sew the strip to make a circular band.
Next, we can pin the neckband to the shirt, but first we need to mark some key points to match up. Begin by placing a pin at the seam of the neckband; this will match up with the center bodice back. Find the shoulder point of your neckband by looking at the shirt neckline, then mimic the shape with your band. You will have to guess a bit here because the front neckline is a bit longer than the back. Place a pin at the folded point that you determined to be the opposite shoulder. Find the center front by folding the band in half, matching the shoulder points. This will give you the centers of the front of the band, and you can mark this with pins, too. Also mark the center front and center back on the shirt neckline, with a disappearing-ink marker or pins.
Pin the band with the right side facing the wrong side of the shirt and stitch together using 3/8" seam allowance. You will gently stretch the neckband to match the width of the shirt. Be sure not to stretch the shirt and only the band. Trim the seam allowance being careful not to trim the seam and pull the neckband up. Press the seam allowance (that little bit left over) up towards the raw edge of the band.
At this point you have two options. You can simply fold over the band and stitch in place leaving the edge raw or fold the raw edge 1/4" and press then fold again a top the seam and topstitch. Normally I go for a raw edge of these hearts seem to need a more professional looks so I'm going to press, fold and stitch. The great thing about the Robert Kaufman knits is that press so nicely. There are a lot of knits that won't hold a press but RK knits behave nicely.
I decided to just turn the raw edges along the sleeve opening just to see how it'd look and I think it came out very nicely. You could instead bind the sleeve opening or use the same method as you did with the neckline and add a trim. Complete the rest of the Ethereal as instructed in the booklet and you'll have a really cozy, sporty shirt! I think this a great alternative to the T-shirt, what about you?!
Want to win 2 yards of yummy Robert Kaufman knit and one PDF Figgy's Pattern to make your own knit version?!!
Enter below and good luck!
Happy Sewing - Shelly
I phone photos just arrived of my happy niece:
how do I love thee? February 01 2014, 2 Comments
This week I shared an Ethereal tunic using Glitz fabric and mentioned I would be writing a bit about a couple different ways you can use the pattern to make it your own. My mother joined in on the fun and added little touches to each of the garments for my niece. On each piece she hand stitched a heart somewhere on the garment and gave Ofelia the task of trying to find the little hearts, some obvious and some slightly hidden. I think this is a great little thing you could do on multiple garments during the month of February or just once on their outfit to wear on February 14th.
The first way to change up the blouse to offer a different look is to simply not use the frill in the front. Some girls just aren't frilly or you're a really smart seamstress/pattern maker and while putting together the instructions for the pattern you completely forgot to add it! (haha) Well a little error ended up being a great opportunity to show off this goodie.
She used the running stitch to create this little heart inside a heart, a blanket stitch along the neck line and another running stitch along the hem. Mom also added a little heart cut out for the undershirt using Heat Bond (love). For this blouse I used Robert Kauffman Essex fabric that had lovely drape and is super soft.
To pair with the blouse I add a UFO sitting in a box from almost 2 years ago that just needed buttons and a little extra love. The fabric I used for this Ayashe skirt was something Karen from OGC had found and made some yummy Dillinger pants with and I was instantly hooked. I found some at JoAnns and I bought 4 yards of it (4 years ago) because it had such nice drape. Whenever I come across a piece I think of her.
Mom added red topstitching and a little heart.
Next up a bubbled Ethereal blouse. For this look we omitted the frill once again and simply add 2" to the bottom of the Ethereal tunic hem length and cut 2 for the main and cut 2 for a lining then bubbled (tutorial coming soon). We used the long sleeve option but angled the sleeve slightly to give it a feminine touch. Fabric is by Bernatex. Can you find the heart?
Lastly, I had created this Ethereal blouse when I was writing instructions for the pattern and there are no changes just a cute crocheted heart for a special touch. The fabric used was a brushed cotton I found at EE Schenck when picking up supplies for a sewing class. Super soft and perfect for the chilly weather season.
Next week on the blog:
Beginning on February 4th the "Heavenly" pattern tour begins with a ton of wonderful bloggers/designers showing off their little or big Figgy garment! Stayed tuned to hear all about a BIG GIVEAWAY at the end of the tour!!
Happy Sewing - Shelly