ayashe sew along; the last day! February 10 2012, 4 Comments
Welcome to the last day of the Ayashe blouse sew along. It went too fast, that just shows us, that even with all of the wonderful details in this blouse, it is a simple pattern but still tastefully contemporary.
Today we will set in the sleeves and finish the hem.
I accidentally forgot to take photos of how I hemmed the sleeves. I got excited, and moved on to the next step. I am making the 18mo size and I found that turning the raw edge of the sleeve hem 1/8" twice was sufficient and left room for the sleeve to attach to the body. There is still room if you choose to turn the hem 1/4" twice, but I wanted extra room to set in the sleeves.
I also hemmed the sleeves before I set them. The reason why is because I find it easier to do this first rather than last for toddler size patterns. The reason why most don't instruct sewists to do this is if you look at the photos above you'll see that I hemmed and pressed my seam open, but it won't stay flat permanently. To fix this I tacked the seam allowance. It won't show and it fixes the issue.
To set in the sleeve you will first turn the garment wrong side out. Insert the sleeves right side facing the right side of the blouse. Align the markings and underarm seam with the side seam and pin. You'll see that it fits perfectly, ahhh.
The trick to setting a sleeve in little sizes is not trying to wrap the sleeve around the machine bar but place the presser foot into the sleeve itself. As you can see above I am sewing on the wrong side of the sleeve inside the sleeve cap. The machine will take me full circle without any drama.
Pink and press.
I chose the elastic hem because Ofelia is still young enough to pull the drawstring out of the casing over and over again just for fun. My sister would have to re thread it over and over again, not for fun. Also, I am an awesome sister by thinking of her. ;)
First, turn the bottom hem 1/4" and press. Turn again 1", press and pin. Leave a 1" opening to feed the elastic through the casing. I left my opening at the side seam where stitches will be less obvious. I am without a bodkin so I used a safety pin to thread the elastic through the casing. Make sure not to twist the elastic and don't let the tail get swallowed or you'll have to re thread. Overlap the ends of the elastic and stitch together. Sew the opening closed.
How much elastic should you use? Good question. My neice's waist is 20" so I cut 15" of elastic that has a good amount of stretch. It stretched to 30". I would go by your child's waist measurement and deduct the amount necessary for the amount of elasticity the elastic has.
For the Draw String method:
On the wrong sides of the shirt hem fuse a 3" piece of interfacing to the blouse on the center bottom front hem. Sew buttonholes 1/4" to the left and right of the center front. Refer to day 2 on how to prepare the bias tape. Once you've press the tape in half, stitch down both edges. Knot the ends of the tape. Feed the tape/string into one buttonhole, around the hem line and out the other.
All Done! Nice work.
Want to see mine?
Back Detail. My wooden hangers are curved which is causing the back to look a bit "hump back". I need to purchase some flat hangers.
I don't know about you but I LOVE IT!
I hope you find this sew along to be helpful as you sew your adorable blouse. Please come back again tomorrow because we have a very special guest hosting a tutorial on how to make the perfect Ayashe blouse just in time for Valentines Day!